Stone Tile Cleaning & Restoration Nettlebed

An initial polish on a Limestone floor will slowly go dull. Surface scratches and etching add up and take off the initial appearance. The best way to reinstate the original polish is by polishing the floor. We use industrial diamond polishing to grind and polish the tiles and restore the initial surface.

If the tiles are not even, even this problem is referred to as "lippage". The only way to make a Limestone tile floor perfectly smooth is by grinding away the lippage and irregular edges of the tiles. You require specialist machines and several years of Limestone grinding and polishing to grind, hone and polish a Limestone tile floor, nevertheless the final result is dazzling. The Limestone floor will have a monolithic appearance as just one slab of Limestone.

Following grinding, the tiles and grout will be at exactly the same level. It is easier to clean a smooth, sleek Limestone than an uneven floor. There will be no uneven grout lines to hold soil. Hole cracks and chip repairs are often part of the Limestone restoration procedure. After we have inspected the Limestone floor, we can advise the best Limestone restoration process.

Learn moreabout our Limestone cleaning Nettlebed service plus our wide-ranging stone floor cleaning restoration solutions or Book your free Quote

Slate is an extremely popular floor and wall tile due to its low porosity and the many textures and varieties of Slate available. Riven slate can get a build-up of dirt inside the crevices that is hard to get rid of.

We use rotary cleaning devices and sealer removers clean the slate. Once the professional cleaning is complete , the floor is left to dry, then apply a lasting, easy to clean sealer.

If you have an appropriate slate, it could be ground smooth, making it better to clean.

Find out more about our Slate cleaning and sealing Nettlebed work including our substantial stone cleaning  service or Book a Quote

Victorian Clay Tiles are installed in a lot of Victorian and Edwardian hallways.

The tiles have a matt finish to get their colour through the clay used in their manufacture.

Owing to how old they are, these floors have had a lot of wear and can have layers of different sealers.

The main issues with victorian floor tiles is to remove decades of polished, oils, waxes, dirt and grime while not doing damage to the tiles.

A colour intensifying sealer is put on following cleaning, to displace the first colours into the tiles. Topical sealers and waxes will give a floor a sheen or glossy finish.

Discover moreabout our Victorian Minton Tiles cleaning and sealing Nettlebed work plus our extensive professional cleaningsolutions or Book a Quote

Porcelain is a ceramic mix with sand and feldspar added to develop a denser tile.

Top quality Porcelain has very low porosity, this means less stains, less water damage, much less need for sealing.

If Porcelain is not made correctly, the surface can be absorbent similar to natural stone floors. It may be hard to remove this soil.

We know how to get rid of ingrained soil using equipment designed to go into the microscopic pits where the soil is held.

After cleaning, we use specialist Porcelain sealers to avoid this problem.

If you have a trough-colour Porcelain, we could re-surface the tiles by Grinding and re-polishing.

Find out about our Porcelain Tiles Cleaning Nettlebed floor restoration service as well as our entire professional cleaning service or Book a Quote.

There tend to be aspects of natural stone restoration when natural stone tile cleaning. Restoring stone and tile floors commonly involves a number of procedures. Stone floors suffer from foot traffic wear and damage, because individuals move over them. Foot traffic harm, stains and surface damage shows up on many stone floors, damaging the appearance, making the floor appear lifeless and unsightly, hence the importance of stone restoration. A polished Stone or granite floor shows wear a lot quicker due to traffic abrasion that will quickly damage he finish and weaken the sparkle. Wear damage eventually affects porous stones like Sandstone, Terracotta, Limestone and Travertine, which are usually protected with a surface sealer.

Most tile floors have cementatious grout lines. Being a little recessed, hence the grout draws in more dirt compared to the natural stone itself. Many natural stone floors also frequently need to have crack, chip or hole repair.

Grinding and honing takes out surface damage from etch spills and surface scratches. Natural stone can be ground to show a new surface.